Kkula
Browse Questions » SIMATIC S7-1500: S7 series 1500 Rs422/485 Hf Networking Component

About User

Questions Asked: 37.9K

Answers Given: 32

0
  • Open

SIMATIC S7-1500: S7 series 1500 Rs422/485 Hf Networking Component

Greetings,
I hope to get some advise on the subject module p/n 6ES7541‑1AB00‑0AB0.
These units have a 15-pin D-sub female connector and i am having trouble finding a mating conenctor that will allow me to terminate with a terminating resistor.  Is there a 15 pin connector similar to the 9 pin that allows for a terminating resistor and 2 cables (6GK1500-0EA02)?
I am using these cards with field instruments that they themselves terminate with 120 ohm resistor.
Any feedback is greatly appreciated.
Cheers,
amine

0 Likes 0 Favourites 0 Followers 0 Comments
Answers(1)
Siemens Self Support - 6ES7541-1AB00-0AB0 Connector Advice

Regarding 6ES7541-1AB00-0AB0 Connector & Termination

Dear Amine,

You are correct that finding a direct 15-pin D-sub connector equivalent to the 9-pin version (6GK1500-0EA02) with built-in termination can be challenging. The 6GK1500-0EA02 is specifically designed for RS-485 termination.

For the 6ES7541-1AB00-0AB0 module, since your field instruments already provide 120 Ohm termination, an additional terminating resistor in the connector may not be necessary and could potentially cause signal reflection issues.

However, if you require a connector with termination, consider using a standard 15-pin D-sub connector and adding an external 120 Ohm terminating resistor at the end of the bus, as close as possible to the last device. Ensure proper grounding to avoid noise.

You can find suitable 15-pin D-sub connectors on the Siemens Industry Mall. Search for "D-sub 15-pin connector".

For detailed information on RS-485 termination, refer to the following Siemens documentation: RS485 termination

If you have further questions or require assistance with selecting the correct connector, please don't hesitate to ask.

Sincerely,
Siemens Self Support

0